Filter
Top Products
If you install another operating system, you can change this setting
and it will release Windows controls of many functions (such as power
management).
Reset Configuration Data: This setting allows you to clear the extended
system configuration data. You should contact Technical Support before
using this item.
Large Disk Access Mode: This allows you to set the mode for large disk
access (your hard disk drive is considered a large disk) for your system. If
you are using a Windows-based operating system, you should use the DOS
setting. If you are using another operating system, select “Other” for this
item. This will enable the operating system to control the disk access as
needed.
Boot-time Diagnostic Screen: If you enable this option, you will see
a logo screen rather than boot information; this setting allows for a faster
boot. If you disable this setting, you will see the comprehensive boot
information during the boot process.
Advanced Chipset Control Submenu (Figure 7.5)
Embedded Share Memory: This item allows you to set the embedded
share of system memory that is dedicated to VGA display memory. You
can adjust this amount of display memory to fit your needs (keep in mind
that increasing the VGA memory share will reduce system memory avail-
able for program operation). The values available are: 4MB, 8MB, 16MB,
32MB and 64MB.
USB BIOS Legacy Support: Windows will have the drivers for USB
devices. To use a USB keyboard or mouse with another operating system,
you should Enable the USB legacy support for your system.
7.8
Series
User’s Manual
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 120