Filter
Top Products
Installing Your Printer for
Windows Me
In order to use your printer with your
WinBook notebook, you will need to set
up the printer drivers and printer settings.
If your printer came with an installation
disk or CD, you can follow the directions
that came with the printer. If not, you can
install the printer software by following
the directions below.
1. Select Start/Settings/Printers and
then Add Printer. (Figure 4.7)
2. In the “Add Printer Wizard,” click on
Next. (Figure 4.8)
3. You will be asked to identify the printer
as local or network. (Figure 4.9)
4. Scroll through the list of manufacturers
and printers to find yours. (Figure 4.10)
If your model is not listed here, check
your printer documentation for a com-
patible printer to use as a source of the
printer driver.
5. The program will then ask you to
identify the connection for that printer
(usually LPT1). (Figure 4.11)
6. You will then be prompted for a name
for this printer. You can accept the
default (e.g. DeskJet 682C), but you
can choose any name you want (e.g.
Old Betsy). If you are going to be
Figure 4.8: Add Printer Wizard
Figure 4.9: Add Printer Wizard
4.9
Chapter 4: Desktop Operation
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 75