Filter
Top Products
Follow the instructions provided.
Once you have established the networking with your PC card, you can
use that network just as you would use the mini-PCI network connection
(see Chapter 4).
PCMCIA SCSI Interface
In order to use devices that require a SCSI interface, you will need to
install a SCSI interface card in the PCMCIA slot in your WinBook note-
book. Once your card has been recognized and the proper drivers loaded,
you will be able to connect SCSI devices to your WinBook notebook.
You can adjust the SCSI interface properties
of your system by entering the Device Manager
(Start\Settings\Control Panel\System). Click
on the plus sign beside the SCSI controller
option (Figure 5.8). Select the SCSI controller
listed and hit the Properties button.
You can now adjust the SCSI settings to meet
the requirements of your hardware.
You can check the documentation for your SCSI
controller or your SCSI devices to determine
what other steps might be required for proper
operation.
5.8
Series
User’s Manual
Figure 5.8: SCSI Device Manager
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 102