Filter
Top Products
Prestige 782R G.SHDSL Router
Filter Configuration 8-11
Table 8-4 Generic Filter Rule Menu Fields
FIELD DESCRIPTION OPTIONS
Filter # This is the filter set, filter rule coordinates, i.e., 2, 3 refers to the second
filter set and the third rule of that set.
Filter Type Use [SPACE BAR] to toggle between types of rules. Parameters
displayed below each type will be different.
Generic Filter
Rule/
TCP/IP
Filter Rule/
IPX Filter Rule
Active
Select Yes to turn on the filter rule. Yes/No
Offset Type the starting byte of the data portion in the packet that you want to
compare. The range for this field is from 0 to 255.
0
(default)
Length Type the byte count of the data portion in the packet that you want to
compare. The range for this field is 0 to 8.
0
(default)
Mask Type the mask (in Hexadecimal) to apply to the data portion before
comparison.
Value Type the value (in Hexadecimal) to compare with the data portion.
More
If Yes, a matching packet is passed to the next filter rule before an action
is taken; or else the packet is disposed of according to the action fields.
If More is Yes, then Action Matched and Action Not Matched will be
N/A.
Yes/No
Log Select the logging option from the following:
None – No packets will be logged.
Action Matched – Only matching packets and rules will be logged.
Action Not Matched – Only packets that do not match the rule
parameters will be logged.
Both – All packets will be logged.
None
Action
Matched
Action Not
Matched
Both
Action
Matched
Select the action for a matching packet.
Check Next
Rule/Forward/
Drop
Action Not
Matched
Select the action for a packet not matching the rule.
Check Next
Rule/Forward/
Drop
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC]
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.