Filter
Top Products
Prestige 782R G.SHDSL Router
Hardware Installation and Initial Setup 2-7
2.6.1 System Management Terminal Interface Summary
Table 2-3 Main Menu Summary
No. MENU TITLE FUNCTION
1 General Setup To set up general information.
2 WAN Setup To set up the WAN.
3 Ethernet Setup To set up Ethernet.
4 Internet Access Setup To set up Internet connection.
11 Remote Node Setup To set up the Remote Node for LAN-to-LAN and Internet connections.
12 Static Routing Setup To set up static route for different protocols.
15 SUA Setup To configure SUA.
21 Filter Set Configuration To set up filters to provide security, call control, etc.
22 SNMP Configuration To set up SNMP-related parameters.
23 System Password To set up security-related parameters.
24 System Maintenance System status, diagnostics, software upload, etc.
25 IP Routing Policy Setup To set up configuration for routing policies.
99 Exit To exit from SMT and return to the blank screen.
2.7 Changing the System Password
Change the default system password by performing the following steps.
Step 1. In the Main Menu, type 23 to open Menu 23 – System Password as shown in the following
figure. When the menu appears, type the old system password, i.e., 1234, and press [ENTER].
Figure 2-7 Menu 23 – System Password
Menu 23 – System Password
Old Password= ****
New Password= ****
Retype to confirm= ****
Press ENTER to CONFIRM or ESC to Cancel: