Filter
Top Products
Prestige 782R G.SHDSL Router
2-6 Hardware Installation and Initial Setup
You can make future changes to the configuration through telnet connections.
See the Telnet Configuration and Capabilities chapter.
Table 2-2 Main Menu Commands
COMMAND DESCRIPTION
Move forward to another menu
Type the number of the desired menu and press [ENTER].
Move to a previous menu
Press the [ESC] key to move back to the previous menu.
Move to a submenu Press [SPACE BAR] to change No to Yes, then press [ENTER] to go
to a submenu. (Fields beginning with “Edit” have default setting of No.)
Move the cursor
Press [ENTER] within a menu to move to the following field or use the
[Up]/[Down] arrow keys to move to the previous or the following field.
Enter information
Press [SPACE BAR] to cycle through the choices or type the
appropriate information in the field.
Save your configuration
Press [ENTER] at the prompt “Press [ENTER] to confirm…”. Saving
the screen data will usually take you to the previous menu.
Exit the SMT Type 99 at the Main Menu and press [ENTER].
Remember to fill in all required fields (denoted by the symbol [?]).
N/A refers to an option that is Not Applicable.
After you type the password, the SMT displays the Main Menu, as shown.
Figure 2-6 SMT Main Menu
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
Prestige 782R Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. Ethernet Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup
Advanced Management
21. Filter Set Configuration
22. SNMP Configuration
23. System Password
24. System Maintenance
25. IP Routing Policy Setup
99. Exit
Enter Menu Selection Number: