Filter
Top Products
Prestige 782R G.SHDSL Router
Hardware Installation and Initial Setup 2-1
Chapter 2
Hardware Installation and Initial Setup
This chapter shows how to make cable connections and set up your xDSL connection using the
SMT.
2.1 Installation Requirements
In addition to your Prestige package, your computer should include the following hardware and software:
• An Ethernet 10/100Base-T NIC (Network Interface Card).
• Communications software configured as follows: VT100 terminal emulation; 9600 Baud; No
parity, 8 Data bits, 1 Stop bit, no Flow Control.
2.2 Front Panel LEDs of the Prestige 782R
The LED indicators on the front panel show the operational status of the Prestige.
Figure 2-1 Front Panel of Prestige 782R
Table 2-1 LED Functions
LED COLOR STATUS MEANING
PWR Green Steady Your Prestige is on.
SYS Green Steady
Blinking
Off
Your Prestige is on and functioning properly.
The system is rebooting, running self-diagnostics or connecting.
Your Prestige is not ready or has a malfunction.
LAN 10M Green Steady
Blinking
You have a successful 10Mb Ethernet connection.
Data is being sent or received.