Filter
Top Products
Prestige 782R G.SHDSL Router
3-6 Internet Access
FIELD DESCRIPTION EXAMPLE
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address
pool.
192.168.1.33
Size of Client IP
Pool
This field specifies the size, or count of the IP address pool. 32
Primary DNS
Server
Secondary DNS
Server
Type the IP addresses of the DNS servers. The DNS servers are passed to
the DHCP clients along with the IP address and the subnet mask.
Remote DHCP
Server
If Relay is selected in the DHCP field above, then type the IP address of
the actual, remote DHCP server here.
The following table will show you how to configure the TCP/IP fields.
Table 3-2 TCP/IP Ethernet Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
TCP/IP Setup
IP Address Type the IP address of your Prestige in dotted decimal notation. 192.168.1.1
(default)
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the
IP address that you assign. Use the subnet mask computed by the
Prestige unless you are implementing subnetting.
255.255.255.0
(default)
RIP Direction
Press [SPACE BAR] to select the RIP Direction from Both/None/In
Only/Out Only.
Both
(default)
Version
Press [SPACE BAR] to select the RIP version: RIP-1/RIP-2B/RIP-2M. RIP-1
(default)
Multicast
Turn on/off IGMP support and select the version from IGMP-v2/IGMP-v1/
None. This field is disabled if DHCP field is set at Client.
IGMP-v2
(default)
IP Policies You can apply up to four IP Policy sets (from twelve) by typing their
numbers separated by commas, e.g., 3, 4, 6, 11.
3
Edit IP Alias Please refer to the following section.
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.