Filter
Top Products
Prestige 782R G.SHDSL Router
Filter Configuration 8-13
Table 8-5 IPX Filter Rule Menu Fields
FIELD DESCRIPTION OPTIONS
Filter # This is the filter set, filter rule coordinates, i.e., 2,3 refers
to the second filter set and the third filter rule of that set.
e.g. 2,3
Filter Type Use [SPACE BAR] to toggle between types of rules.
Parameters displayed for each type will be different.
Device Filter
Rule/ TCP/IP
Filter Rule/ IPX
Filter Rule
Active
Select Yes to turn on the filter rule. Yes/No
IPX Packet Type Type the IPX packet type (1-bit in hexadecimal) you want
to filter.
The more popular types are (in hexadecimal format):
01 – RIP
04 – SAP
05 – SPX (Sequenced Packet eXchange)
11 – NCP (NetWare Core Protocol)
14 – Novell NetBIOS
e.g.
14
Destination:
Network #
Type the destination network numbers (4-byte in
hexadecimal) of the packet that you want to filter.
e.g.
22222222
Node # Type the destination node number (6-byte in
hexadecimal) of the packet you want to filter.
e.g.
333333333333
Socket # Type the destination socket number (2-byte in
hexadecimal) of the packets that you want to filter.
e.g.
4444
Socket # Comp Select the comparison you want to apply to the
destination socket in the packet against that specified
above.
None/Equal/ Not
Equal/
Less/Greater
Source:
Network #
Type the source network numbers (4-byte in hexadecimal)
of the packet that you want to filter.
e.g.
55555555
Node # Type the source node number (6-byte in hexadecimal) of
the packet you want to filter.
e.g.
666666666666
Socket # Type the source socket number (2-byte in hexadecimal) of
the packets that you want to filter.
e.g.
7777
Socket # Comp Select the comparison you want to apply to the source
socket in the packet against that specified above.
None/Equal/ Not
Equal/
Less/Greater