Filter
Top Products
Prestige 782R G.SHDSL Router
2-12 Hardware Installation and Initial Setup
Figure 2-11 Menu 3 – Ethernet Setup
2.11.1 LAN Setup
Use this menu to specify filter set(s) that you want to apply to Ethernet traffic. You seldom need to filter
Ethernet traffic; however, the filter sets may be useful for blocking certain packets, reducing traffic and
preventing security breaches.
Figure 2-12 Menu 3.1 – LAN Port Filter Setup
If you need to define filters, please read the chapter Filter Set Configuration first, then return to this menu.
2.11.2 Protocol Dependent Ethernet Setup
• To set up TCP/IP Ethernet see the section on Internet Access Applications.
• To set up Novell IPX Ethernet see the section on Ethernet Setup.
• To set up Bridging Ethernet see the section on Bridging Setup.
Menu 3 - Ethernet Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
3. Novell IPX Setup
4. Bridge Setup
Enter Menu Selection Number:
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: