Filter
Top Products
Prestige 782R G.SHDSL Router
Remote Node Configuration 4-3
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION OPTIONS
Rem Node Name
[?] denotes a required field. Type a unique, descriptive
name of up to eight characters for this node, for
example, Plotzer.
Active
Press [SPACE BAR] to toggle between Yes and No.
Inactive nodes are displayed with a minus sign (–).
Yes/No
Encapsulation
PPP refers to RFC-2364 (PPP Encapsulation over ATM
Adaptation Layer 5). If RFC-1483 (Multiprotocol
Encapsulation over ATM Adaptation Layer 5) of ENET
ENCAP are selected, then the Rem Login, Rem
Password, My Login, My Password, Edit PPP
Options and Authen fields are not applicable (N/A).
Moreover, ENET ENCAP encapsulaton does not apply
to IPX routing.
PPP
RFC-1483
ENET ENCAP
Incoming:
Rem Login
Type the login name that this remote node will use to
call your Prestige. The login name and the Rem
Password will be used to authenticate this node.
Rem Password Type the password used when this remote node calls
your Prestige.
Outgoing:
My Login
Type the login name assigned by your ISP when the
Prestige calls this remote node.
My Password Type the password assigned by your ISP when the
Prestige calls this remote node.
This field sets the authentication protocol used for
outgoing calls. Options for this field are:
CHAP/PAP – Your Prestige will accept either CHAP or
PAP when requested by this remote node.
CHAP/PAP
CHAP – accept CHAP (Challenge Handshake
Authentication Protocol) only.
CHAP
Authen
PAP – accept PAP (Password Authentication Protocol)
only.
PAP
Route This field determines the protocol used in routing.
IP / IPX /
IP+IPX / None