Filter
Top Products
Prestige 782R G.SHDSL Router
System Maintenance 10-19
Figure 10-22 System Maintenance – Time and Date Setting
Table 10-7 Time and Date Setting Fields
FIELD DESCRIPTION
Use Time
Server at
Bootup=
Type the time service protocol that your timeserver sends at bootup. Option are
Daytime (RFC 867), Time (RFC-868), NTP (RFC-1305) and None. The formats
differ, e.g., the Daytime (RFC 867) format is day/month/date/year/time zone of
the server while the Time (RFC-868) format gives a 4-byte integer giving the
total number of seconds since 1/1/1970 at 0:0:0. The NTP (RFC-1305) format is
similar. Not all timeservers support all protocols, so check with your ISP/network
administrator or use trial and error to find a viable protocol. If you select None
(the default value) you can change the time manually, but at each reboot the
time & date will reset to 2000-01-01 0:0:0.
Time Server IP
Address=
Type the IP address of the your timeserver. Check with your ISP/network
administrator if you are unsure of this information.
Current Time: Type the current time.
New Time Type the new time in hour, minute and second format.
Current Date: Type the current date.
New Date Type the new date in year, month and date format.
Time Zone=
GMT+
Press [SPACE BAR] to set: Greenwich Mean Time (GMT) plus number of hours
to your time zone. Note: Daylight savings time alters this time.
On completion, press [ENTER] to save the setting and press [ESC] to return to Menu 24.
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time: 00 : 00 : 00
New Time (hh:mm:ss): 04 : 16 : 42
Current Date: 2001 - 01 - 01
New Date (mm-dd-yyyy): 2001 -01 - 01
Time Zone= GMT
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.