Filter
Top Products
Prestige 782R G.SHDSL Router
Remote Node TCP/IP Configuration 5-3
Figure 5-3 Sample IP Addresses for a TCP/IP LAN-to-LAN Connection
To configure the TCP/IP parameters of a remote node, first configure the three fields in Menu 11.1 –
Remote Node Profile, as shown in the following table. For more details on the IP Option fields, refer to
Chapter 3 – Internet Access Application.
Table 5-1 TCP/IP-related Fields in Remote Node Profile
FIELD DESCRIPTION OPTIONS
Route
Make sure IP is among the protocols in the Route field in Menu 11.1 –
Remote Node Profile.
IP
Rem IP Addr
Type the IP address of the remote gateway in Menu 11.1 – Remote
Node Profile. Type the remote Prestige’s WAN IP address here
(172.12.02 in the example shown previously). If the remote Prestige’s
WAN IP address is 0.0.0.0, then type 192.168.1.1 (its LAN IP address)
here.
Edit IP
Press [SPACE BAR] to select Yes and press [ENTER] to display menu. Yes/No