Filter
Top Products
Prestige 782R G.SHDSL Router
8-6 Filter Configuration
GEN
Off Offset
Len Length
IPX
PT IPX Packet Type
SS Source Socket
DS Destination Socket
8.3 Configuring a Filter Rule
To configure a filter rule, Type its number in Menu 21.1 – Filter Rules Summary and press [ENTER] to
open Menu 21.1.1 for the rule.
There are three types of filter rules: TCP/IP, IPX and Generic. Depending on the type of rule, the
parameters for each the type will be different. Use [SPACE BAR] to select the type of rule that you want to
create in the Filter Type field and press [ENTER] to open the respective menu.
To speed up filtering, all rules in a filter set must be of the same class, i.e., protocol filters or generic filters.
The class of a filter set is determined by the first rule that you create. When applying the filter sets to a port,
separate menu fields are provided for protocol and device filter sets. If you include a protocol filter set in a
device filters field or vice versa, the Prestige will warn you and will not allow you to save.
8.3.1 TCP/IP Filter Rule
This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on
the fields in the IP and the upper layer protocol, e.g., UDP and TCP headers.
To configure TCP/IP rules, select TCP/IP Filter Rule from the Filter Type field and press [ENTER] to
open Menu 21.1.1 – TCP/IP Filter Rule, as shown next.