Filter
Top Products
Prestige 782R G.SHDSL Router
3-8 Internet Access
Figure 3-4 Menu 3.2.1 – IP Alias Setup
Follow the instructions in the following table to configure IP Alias parameters.
Table 3-3 IP Alias Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
IP Alias 1/2
Choose Yes to configure the LAN network for the Prestige. Yes
IP Address Type the IP address of your Prestige in dotted decimal notation. 192.168.2.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the Prestige.
255.255.255.0
RIP Direction
Press [SPACE BAR] to select RIP direction from Both/In Only/Out Only. Both
Version
Press [SPACE BAR] to select from RIP-1/RIP-2B/RIP-2M. RIP-1
Incoming
Protocol Filters
Type the filter set(s) you want to apply to the incoming traffic between this
node and the Prestige.
Outgoing
Protocol Filters
Type the filter set(s) you want to apply to the outgoing traffic between this
node and the Prestige.
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.