Filter
Top Products
Prestige 782R G.SHDSL Router
System Maintenance 10-11
10.6 Restore Configuration
Type 6 in Menu 24 – System Maintenance to restore the configuration from your computer to the Prestige.
Again, you must use the console port and Xmodem protocol to restore the configuration.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power failure
should occur, your configuration is safe.
Step 1. Go to Menu 24.6 (shown next).
Figure 10-12 Restore Configuration
Step 2. Press Y to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications
programs should be similar. Run the HyperTerminal program.
Step 3. Click Transfer, then Send File to display the following screen.
Figure 10-13 HyperTerminal Screen
Step 4. Type the location on your computer of the rom configuration file and make sure you choose the
Xmodem protocol. Then press Send.
Step 5. After a successful restoration you will see the following screen. Press any key to return to reboot
the system.
Choose the Xmodem
protocol.
Enter where you want to place
the rom configuration file on
your computer.
Finally, click Send.
Ready to restore Configuration via Xmodem.
Do you want to continue? (y/n):