Filter
Top Products
1-16
Task Remarks
Configuring the Maximum Transmitting
Rate on the Current Port
Optional
The default value is recommended.
Configuring the Current Port as an Edge
Port
Optional
Setting the Link Type of a Port to P2P Optional
Enabling MSTP
Required
To prevent network topology jitter
caused by other related configurations,
you are recommended to enable MSTP
after performing other configurations.
Configuring an MST Region Required
Configuring How a Port Recognizes and
Sends MSTP Packets
Optional
Configuring the Timeout Time Factor Optional
Configuring the Maximum Transmitting
Rate on the Current Port
Optional
The default value is recommended.
Configuring the Current Port as an Edge
Port
Optional
Configuring the Path Cost for a Port Optional
Configuring Port Priority Optional
Configuring
Leaf Nodes
Setting the Link Type of a Port to P2P Optional
Performing mCheck Operation Optional
Configuring Guard Functions Optional
Configuring Digest Snooping Optional
Configuring Rapid Transition Optional
错误！未找到引用源。
Optional
MSTP Maintenance Configuration Optional
Enabling Trap Messages Conforming to 802.1d Standard Optional
Configuring Root Bridge
Configuring an MST Region
Configuration procedure
Follow these steps to configure an MST region:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter MST region view
stp region-configuration
—