Filter
Top Products
1-6
Configuration example
# Configure ACL 2000 to deny packets whose source IP addresses are 192.168.0.1.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule deny source 192.168.0.1 0
# Display the configuration information of ACL 2000.
[Sysname-acl-basic-2000] display acl 2000
Basic ACL 2000, 1 rule
Acl's step is 1
rule 0 deny source 192.168.0.1 0
Configuring Advanced ACL
An advanced ACL can filter packets by their source and destination IP addresses, the protocols carried
by IP, and protocol-specific features such as TCP/UDP source and destination ports, ICMP message
type and message code.
An advanced ACL can be numbered from 3000 to 3999. Note that ACL 3998 and ACL 3999 cannot be
configured because they are reserved for cluster management.
Advanced ACLs support analysis and processing of three packet priority levels: type of service (ToS)
priority, IP priority and differentiated services codepoint (DSCP).
Using advanced ACLs, you can define classification rules that are more accurate, more abundant, and
more flexible than those defined for basic ACLs.
Configuration prerequisites
z To configure a time range-based advanced ACL rule, you need to create the corresponding time
ranges first. For information about of time range configuration, refer to
Configuring Time Range.
z The settings to be specified in the rule, such as source and destination IP addresses, the protocols
carried by IP, and protocol-specific features, are determined.
Configuration procedure
Follow these steps to define an advanced ACL rule:
To do... Use the command... Remarks
Enter system view
system-view
—
Create an advanced ACL and
enter advanced ACL view
acl number acl-number
[ match-order { auto |
config } ]
Required
config by default
Define an ACL rule
rule [ rule-id ] { permit | deny }
protocol [ rule-string ]
Required
For information about protocol
and rule-string, refer to ACL
Commands.
Assign a description string to
the ACL rule
rule rule-id comment text
Optional
No description by default
Assign a description string to
the ACL
description text
Optional
No description by default