Filter
Top Products
Command Reference Guide Port Channel Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1031
switchport gvrp
Use the switchport gvrp command to enable or disable GVRP on an interface.
Syntax Description
No subcommands.
Default Values
By default, GVRP is disabled on all ports.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Functional Notes
Enabling GVRP on any interface enables GVRP globally.
Usage Examples
The following example enables GVRP on port channel 3:
(config)#interface port-channel 3
(config-p-chan 3)#switchport gvrp