Filter
Top Products
Command Reference Guide Quality of Service (QoS) Map Commands
61200510L1-35E Copyright © 2005 ADTRAN 1350
set precedence <0-7>
The set precedence command is an optional command for a QoS map that can be used to modify the IP
precedence value (on matching packets) to the specified value.
Syntax Description
<0-7> Specifies the decimal IP precedence value.
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
This command sets the IP precedence value (for all matching traffic) to 5:
(config)#qos map VOICEMAP 10
(config-qos-map)#set precedence 5