Filter
Top Products
Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 234
show ip policy-sessions <policyname> [all]
Use the show ip policy-sessions command to display a list of current policy class associations. Refer to ip
policy-class <policyname> max-sessions <number> on page 437 for information on configuring access
policies.
Syntax Description
<policyname> Optional.
Displays policy class associations for a specific policy class.
all Displays all policy-sessions, including active associations (through which the
firewall is allowed to pass traffic) and associations flagged for deletion (through
which the firewall is forbidden to pass traffic). Associations flagged for deletion will
usually be freed within a few seconds of timeout or deletion, depending on packet
congestion; servicing of packets is given priority. New traffic matching such an
association will create a new active association, provided the traffic still matches a
policy-class allow or NAT entry.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.
Release 11.1 The All option was added.