Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 734
dial-backup maximum-retry <attempts>
Use the dial-backup maximum-retry command to select the number of calls the router will make when
attempting to backup a link. Use the no form of this command to return to the default state.
Syntax Description
<attempts> Selects the number of call retries that will be made after a sub-link failure (valid
range: 0 to 15).
Setting this value to 0 will allow unlimited retries during the time the network is
failed.
Default Values
By default, the dial-backup maximum-retry period is set to 0 attempts.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1 Command was introduced.
Release 8.1 ATM sub-interface was added.
Usage Examples
The following example configures the AOS to retry a dial-backup call 4 times before considering backup
operation not available:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup maximum-retry 4
