Filter
Top Products
Command Reference Guide Line (Console) Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 539
login authentication <aaa login list>
Use the login authentication command to specify the named AAA login list to use for authenticating users
connecting on this line.
Syntax Description
<aaa login list> Specifies the AAA login list to use for authentication.
Default Values
The default value is the default AAA list.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
If the AAA subsystem is activated but no login authentication list is given, the default list is used. If the
default list is used but the default list is not configured, the behavior for consoles is to be granted access.
This prevents a lockout configuration.
Usage Examples
The following example specifies that myList will be used for authenticating users connecting on this line:
(config)#line console 0
(config-con 0)#login authentication myList