Filter
Top Products
Command Reference Guide Frame Relay Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 874
dial-backup auto-restore
Use the dial-backup auto-restore command to configure the interface to automatically discontinue
dial-backup when all network conditions are operational. Use the no form of this command to disable the
auto-restore feature. For more detailed information on Frame Relay dial-backup functionality, refer to the
Functional Notes and Technology Review sections of dial-backup call-mode [answer | answer-always |
originate | originate-answer | originate-answer-always] on page 876.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example configures the AOS to automatically restore the primary connection when the
failure condition clears:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup auto-restore