Filter
Top Products
Command Reference Guide HDLC Command Set
61200510L1-35E Copyright © 2005 ADTRAN 934
crypto map <mapname>
Use the crypto map command to associate crypto maps with the interface.
Syntax Description
<mapname> Enter the crypto map name that you wish to assign to the interface.
Default Values
By default, no crypto maps are assigned to an interface.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 9.1 Command was introduced.
Functional Notes
When configuring a system to use both the stateful inspection firewall and IKE negotiation for VPN, keep
the following notes in mind.
When defining the policy-class and associated access-control lists (ACLs) that describe the behavior of the
firewall, do not forget to include the traffic coming into the system over a VPN tunnel terminated by the
system. The firewall should be set up with respect to the un-encrypted traffic that is destined to be sent or
received over the VPN tunnel. The following diagram represents typical AOS data-flow logic.
When you apply a map to an interface, you are applying all crypto maps with the given
map name. This allows you to apply multiple crypto maps if you have created maps which
share the same name but have different map index numbers.
For VPN configuration example scripts, refer to the technical support note
Configuring VPN located on the ADTRAN OS Documentation CD provided with your
unit.