Filter
Top Products
Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 146
dir
Use the dir command to display a directory list of files on the system.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following is sample output from the dir command:
>enable
#dir
Files:
988161 NV3200A-02-00-11.biz
1152 startup-config
1113 startup-config.bak
1739729 030018adv.biz
231424 boot030015.biz
1352150 NV3200A-E03-00-17.biz
232894 boot030018.biz
1812281 NV3200A-E03-00-20-adv.biz
6366976 bytes used, 335104 available, 6702080 total