Filter
Top Products
Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 772
oam-pvc managed <frequency>
Use the oam-pvc managed command to enable end-to-end F5 Operation, Administration, and
Maintenance (OAM) loopback cell generation and OAM management for an ATM interface. Use the no
form of this command to disable generation of OAM loopback cells.
Syntax Description>
<frequency> Specifies the time delay between transmitting OAM loopback cells. The range is
from 0 to 600 seconds.
Default Values
By default, the frequency is 1 second.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example enables OAM loopback cell generation with a frequency of 5 seconds:
(config)#interface atm 1.1
(config-atm 1.1)#oam-pvc managed 5