Filter
Top Products
Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 465
logging email receiver-ip <ip address>
Use the logging email receiver-ip command to specify the IP address of the email server to use when
sending notification that an event matched the criteria configured using the logging email priority-level
command. Refer to logging email priority-level [error | fatal | info | notice | warning] on page 464 for
related information. Use the no form of this command to remove a configured address.
Syntax Description
<ip address> Specifies the IP address (in dotted decimal notation) of the mail server to use
when sending logged messages.
Default Values
By default, there are no configured email server addresses.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies an email server (with address 172.5.67.99) to use when sending logged
messages:
(config)#logging email receiver-ip 172.5.67.99