Filter
Top Products
Command Reference Guide BGP Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1278
bgp log-neighbor-changes
Use the bgp log-neighbor-changes command to control the logging of neighbor state changes. Use the no
form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, neighbor changes are not logged.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 8.1 Command was introduced.
Functional Notes
This command controls logging of BGP neighbor state changes (up/down) and resets. This information is
useful for troubleshooting and determining network stability.
Usage Examples
The following example enables logging of BGP neighbor state changes:
(config)#router bgp 1
(config-bgp)#bgp log-neighbor-changes