Filter
Top Products
Command Reference Guide HDLC Command Set
61200510L1-35E Copyright © 2005 ADTRAN 970
ip rip receive version [1 | 2]
Use the ip rip receive version command to configure the RIP version the unit accepts in all RIP packets
received on the interface. Use the no form of this command to restore the default value.
Syntax Description
1
Only accept received RIP version 1 packets on the interface.
2
Only accept received RIP version 2 packets on the interface.
Default Values
By default, all interfaces implement RIP version 1 (the default value for the version command).
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 9.1 Command was introduced.
Functional Notes
Use the ip rip receive version command to specify a RIP version that overrides the version (in the
Router RIP) configuration. See
version [1 | 2] on page 1326 for more information.
The AOS only accepts one version (either 1 or 2) on a given interface.
Usage Examples
The following example configures the HDLC interface to accept only RIP version 2 packets:
(config)#interface hdlc 1
(config-hdlc 1)#ip rip receive version 2