Filter
Top Products
Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 436
ip name-server <server-address1-6>
Use the ip name-server command to designate one or more name servers to use for name-to-address
resolution. Use the no form of this command to remove any addresses previously specified.
Syntax Description
<server-address1-6> Specifies up to six name-server addresses.
Default Values
By default, no name servers are specified.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example specifies host 172.34.1.111 as the primary name server and host 172.34.1.2 as the
secondary server:
(config)#ip name-server 172.341.1.111 172.34.1.2
This command will be reflected in the configuration file as follows:
ip name-server 172.34.1.111 172.34.1.2