Filter
Top Products
Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 337
aaa authorization [config-command | console]
Use the aaa authorization to enable or disable authorization for configuration mode commands and for
console mode. Use the no form of this command to return to the default setting. For more detailed
information on AAA functionality, refer to the Technology Review section of the command aaa on on page
340.
Syntax Description
config-command Enables authorization for configuration mode commands. Only level 1
(unprivileged) and level 15 (privileged) commands are supported.
console Allows authorization to be applied to the console.
Default Values
By default, authorization for console is disabled. However, configuration mode commands are authorized
by default.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example enables authorization of configuration mode commands:
(config)#aaa authorization config-command
The following example enables authorization of console commands:
(config)#aaa authorization console