Avaya P880 Switch User Manual


 
4-20
Chapter 4
Cajun P550/P880/P882 Switch User Guide
Using Hunt Groups to Aggregate Bandwidth
between Switches
Hunt groups allow you to aggregate multiple switch ports into a
single group, effectively combining the bandwidth into a single
connection.
For example, if you connect three gigabit ports each on a pair of
switches into a hunt group, the aggregated connection will have six
gigabits of available bandwidth (full- duplex).
Hunt groups also provide fault tolerance. If a port in a hunt group
fails, the remaining ports will continue forwarding the traffic on the
link.
Features Hunt group features include:
Shared traffic load.
Address-based traffic sorting — This keeps packets in the right
order.
Fault tolerance — If a port in a group fails, the remaining ports
in the group pick up the traffic load.
Support for any number of same-speed connections in a group
— The group is not restricted to a single module in a switch.
Quicker recovery from link failure — If a port in the group fails,
the remaining ports carry the load. Recovery is not limited by
STP convergence time (convergence time is the time the
network takes to resume steady-state forwarding after STP
reconfiguration).
Supports up to 25 groups per switch.