Filter
Top Products
15-22
Chapter 15
Cajun P550/P880/P882 Switch Configuration Guide
Adding or
Deleting
Interfaces to a
Zone Filter
Using the CLI
To add interfaces to a zone filter using the CLI, enter the following
command from Configure mode:
> (config-if <interface-name>:)# appletalk
access-list <access-list-number>
<permit|deny> zone <string>
To delete interfaces to an zone filter, enter the following command
from Configure mode:
> (config-if <interface-name>:)# no appletalk
access-list <access-list-number> <permit|deny>
zone <string>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about these commands.
Viewing AppleTalk Statistics
This section includes:
■ Viewing AppleTalk Global Statistics
■ Viewing the AppleTalk Interface Statistics Table
■ Viewing the AppleTalk Interface Statistics Table Using the CLI
■ Viewing AppleTalk Route Table Statistics
■ Viewing the AppleTalk ARP Cache Table
■ Viewing the AppleTalk Zone Table
■ Viewing AppleTalk Zone Table Statistics
■ Viewing the AppleTalk NBP Table