Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Managing Intelligent Multicasting
16-21
3. Click ...:
— APPLY to save your changes.
— CANCEL to restore previous settings.
— CLEAR to clear the statistics.
— REFRESH to refresh the contents of the table.
Configuring
IGMP Snooping
Using the CLI
To configure IGMP snooping using the CLI, enter the following
command from Configure mode:
cajun(configure)# set igmp-snooping enable
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring the Lucent Group Management
Protocol (LGMP) Server
The section provides the following procedures:
■ Enabling the LGMP Server
■ Configuring the LGMP Server
■ Modifying the LGMP Server Display per VLAN
■ Modifying LGMP Clients Per VLAN
Enabling the LGMP Server
You can enable the LGMP server using either the web agent or the
CLI.