Filter
Top Products
19-12
Chapter 19
Cajun P550/P880 /P882 Switch User Guide
Setting Up a
Mirror Port
Using the CLI
To set up an RMON mirror port using the CLI, enter the following
command from Configure mode:
cajun(configure)# set port mirror <mod-port-range>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Sampler Type* Selects how often you want the mirror port to receive
traffic samples:
• Always - sends all samples.
• Periodic - sends samples at the interval described
below.
• Disabled - shuts off traffic samples to the mirror
port, but keeps the association intact.
Max Packets
per Second
Displays the number of packets per second that are
served by the mirror port.
* Sampling only applies to inbound traffic.
Table 19-3. Port Mirroring Configuration Dialog Box Parameters
continued
Parameter Definition