Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Configuring IP Routing
9-27
Figure 9-12. Add BOOTP/DHCP Server Entry Dialog Box
3. Enter the BOOTP/DHCP server IP address in the IP Address
field.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
* Note: It is possible to create multiple BOOTP/DHCP Server
Entries if necessary.
Creating a
BOOTP/DHCP
Server Entry
Using the CLI
To create a BOOTP/DHCP entry using the CLI, enter the following
command in Configure mode:
cajun (configure)# ip boot-dhcp server
<ip-address>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
IP Multicast
IP Multicast enables a single host to distribute information to
multiple recipients. To do this, multicast protocols use class D IP
addresses to specify specific multicast groups to which information is
sent. The class D IP address used by multicast routing protocol
ranges from 224.0.0.1 to 224.0.0.255. The class D IP addresses
available for general use are 224.0.1.0 to 239.255.255.255.