Barco LED-PRO Projector User Manual


 
LED-PRO • User’s Guide 103
4. Operation
Using the LED Menu
Following are descriptions of each menu function.
Status
Type
pí~íìë
The Status field enables or disables the LED on-screen display.
qóéÉ
The Type field enables you to select various types of on-screen displays, such as mode,
tile number, temperature, etc.
_ççëí=jçÇÉ
On the LED Menu,the Boost Mode field allows you to enable or disable the boost mode.
When enabled, the upper end of the contrast range is boosted for a brighter LED display
(normally 5000 NIT, but 7000 NIT in boost mode). Please note:
This mode is specific to OLite 510 tiles, and is not supported by other Barco tiles.
Future tiles may support this mode.
In this mode, running the tiles brighter accelerates the “dimming” of the overall
LED capacity over time. Refer to the specific tile documentation for details.
`êÉ~íáîÉ=jçÇÉ
On the LED Menu, the Creative Mode field enables certain tiles (such as the OLite 510) to
switch between normal and creative modes.
Normal mode is essentially LED operation within a standard rental structure.
Creative mode describes non-standard setups, such as those created with
Director Toolset. Refer to the “Director Toolset User’s Guide” for additional
details on creative mode.
qáäÉ=jçÇÉ
On the LED Menu, the Tile Mode field enables you to select between two tile modes.
In Real mode, each pixel output from LED-PRO is mapped directly to each LED
tile pixel.
In Virtual tile mode, the LED tile’s resolution is essentially doubled. Each pixel
output from LED-PRO is mapped to four virtual 3xLED pixels within each 5xLED
pixel grouping.