Barco LED-PRO Projector User Manual


 
60 LED-PRO • User’s Guide
4. Operation
Using the Setup Wizard
The figure below illustrates the Rolling Grid Test Menu.
Figure 4-38. Rolling Grid Test Menu
~ Select Yes if the grid test pattern rolls smoothly through the picture.
Please continue with step 11.
~ Select No if the grid does not roll smoothly through the picture. In this
case, the system asks you to check data cabling.
Press SEL to return to the Wall Data Connection Menu.
Re-enter the proper horizontal or vertical cabling, and press
SEL to continue again with the Tile Connection Menu and
Rolling Grid Test Menu.
11. From the Rolling Grid Test Menu, the Position Output Menu appears.
Figure 4-39. Position Output Menu (sample)
If required:
~ Select H Position and adjust the raster box for a perfect outline.
~ Select H Size and adjust the raster box for a perfect outline.
~ Select V Position and adjust the raster box for a perfect outline.
~ Select V Size and adjust the raster box for a perfect outline.
ROLLING GRID TEST
> Is the grid Test
Pattern rolling
smoothly through
the picture?
Yes
No
Note
The raster box may flash on and off, on the left and top edges
of the image. This is normal.
Position Output:
> Adjust the white box
until the top,
bottom, and sides
can all be seen.
H Position 38
H Size 288
V Position 28
V Size 270
Next
Previous
Note
Typically, there should not be a need to adjust the sizes.