Barco LED-PRO Projector User Manual


 
LED-PRO • User’s Guide 23
3. Installation
Format Connection Table
cçêã~í=`çååÉÅíáçå=q~ÄäÉ
Use the following table to connect various source formats to LED-PRO, using the system’s
universal input connectors in conjunction with a customer supplied VGA to 5 x BNC
breakout cable. Please note:
RGB format — typical devices: Computers
S-Video (Y/C) format — typical devices: S-Video DVD or VCR
YUV or YP
b
P
r
(Betacam) format — typical devices: DVD player, Betacam deck
Composite format — typical devices: NTSC/PAL DVD or VCR
Using a customer supplied VGA to 5 x BNC breakout cable, multiple input combinations
are possible. Cells with checks denote the connections required for the indicated format.
Please contact Barco Technical Support for information on obtaining breakout cables. In
Appendix C, refer to the “Contact Information” section on page 162 for details.
Note
For RGB with H and V sync, use the VGA connector directly.
Table 3-2. Analog Input Combinations using Breakout Cable
Breakout Cable
Wire Color
Composite
Video
S-Video
(Y/C)
YUV
(YP
b
P
r
)
RGB
Sync on Green
RGB
Comp Sync
RGB
Separate H V
R
3
(Chrom)
3
(P
r
)
3
3 3
G
3 3
(Lum)
3
(Lum)
3 3 3
B
3
(P
b
)
3 3 3
H Sync
3 3
V Sync
3