Filter
Top Products
LED-PRO • User’s Guide 59
4. Operation
Using the Setup Wizard
8. From the Set Wall Dimensions Menu, the Wall Data Connection Menu
appears.
Figure 4-36. Wall Data Connection Menu
~ Select Horizontally if cables are connected horizontally.
~ Select Vertically if cables are connected vertically.
~ Select Previous to return to the previous menu in the wizard.
9. After selecting the correct data cable connection, the Tile Connection Menu
appears.
Figure 4-37. Tile Connection Menu (sample)
Highlight the correct connection point, and press SEL. Please note:
~ In a standard tile array, choices are Bottom Right, Bottom Left, Top
Right, and Top Left.
~ In a horizontal tile array that is one tile in height, choices are Left or
Right.
~ If a vertical tile array that is one tile wide, choices are Top or Bottom.
10. Select Next to display the Rolling Grid Test Menu. During this interval, the
system configures the wall, and displays a test pattern with diagonal motion.
> How do the wall data
cables connect?
Horizontally
Vertically
Previous
> Looking at the wall
from the front, the
first tile connected
to the LED-PRO is
the:
Bottom Right
Next
Previous