Filter
Top Products
72 LED-PRO • User’s Guide
4. Operation
Using the Expert Mode Menu
qóéÉ
From the Input Setup Menu, select Type to choose among the possible signal types
available at the current input channel. Please note:
• Values are: RGB, YPbPr, NTSC/PAL/SECAM, SDI, and DVI.
• When “In Auto Acquire” is enabled, the “type” selections will be limited
depending on the signal present on the currently selected input.
S If input 1 is connected to a DVI source, DVI will be the only choice — which
cannot be changed. Similarly, SDI will be the only choice whenever the SDI
input is selected.
• When “In Auto Acquire” is off, the “type” selections are expanded to allow you to
manually select the Video type.
`çäçêëé~ÅÉ
From the Input Setup Menu, select Colorspace to choose among the possible component
video standards for YPbPr. Please note:
• Values are: RGB, SMPTE, BETA and M-II.
• For all other video types, color space is set to RGB and cannot be changed.
• The default selection for YPbPr is SMPTE. You may change this setting to BETA
or M-II to allow the LED-PRO to correctly sample the Y, Pb and Pr components
across their full dynamic range.
pçìêÅÉ=^äáÖåãÉåí
From the Input Setup Menu, select Source Alignment to display one of three Source
Alignment menus — depending upon the format of the selected source — analog, SDI or
DVI. These procedures are identical to those located on the Setup Menu.
• For analog input sources, refer to the “Source Alignment — Analog” section on
page 43 for instructions.
• For SDI input sources, refer to the “Source Alignment — SDI” section on
page 46 for instructions.
• For DVI input sources, refer to the “Source Alignment — DVI” section on
page 48 for instructions.
`ìëíçã=få=cçêã~í
From the Input Setup Menu, select Custom In Format to display the Custom Input
Formats Menu, which enables you to define and save a new input video format — or to
edit and save a previously-defined format. Please note:
• Saved formats are stored in a user library, which is searched (after the standard
system library is searched) during the auto-acquisition process.
• All saved formats are available as input formats on any input channel.
• A maximum of 32 custom formats may be stored.