Barco LED-PRO Projector User Manual


 
LED-PRO • User’s Guide 31
4. Operation
Using the Menu System
rëáåÖ=íÜÉ=jÉåì=póëíÉã
This section lists the rules and conventions for using LED-PRO’s menu system. The figure
below illustrates a sample menu:
Figure 4-9. Test Pattern Menu (sample)
Please note the following important rules and conventions:
Pressing any of the buttons in the Menu Keys Section takes you directly to the
top level of the selected menu.
The top line names the current menu, in all capital letters.
Subsequent lines typically display two fields:
~ For a listed function, the left-hand field names the function and the right-
hand field is the function’s current parameter or value.
~ For a listed sub-menu, the left-hand field names the sub-menu that you
can access, and the right-hand field displays the double arrow (>>),
indicating that a sub-menu is available.
The “navigation” cursor (>) in the left-hand column indicates the current line on
which action can be taken. This arrow “scrolls” as you rotate the knob.
Scrolling:
~ Turn the ADJUST knob counter-clockwise (CCW) to scroll down.
~ Turn the ADJUST knob clockwise (CW) to scroll up.
To enter a sub-menu, scroll to the desired line and press SEL.
To change a parameter, scroll to the desired line and press SEL. The cursor
changes to the “edit” cursor (#). Use the ADJUST knob to modify the parameter.
To accept a parameter or value, press SEL. The edit cursor changes back to the
navigation cursor.
In the “edit” mode, to exit (or cancel) without changing the original parameter,
press
ESC.
TEST PATTERN
Type Burst
> Raster Box Off
Diagonal Motion Off
Note
Throughout this chapter, the term “select” is used as an
abbreviation for “scroll to a selected menu line and press the
SEL button.”
S Select the Raster Box field to ...
Note
You must press SEL to activate an LED wall function.
Processor functions generally update as you adjust them.