Barco LED-PRO Projector User Manual


 
48 LED-PRO • User’s Guide
4. Operation
Using the Setup Menu
pçìêÅÉ=^äáÖåãÉåí=Ô=asf
From the Setup Menu (for a DVI input source), select Source Alignment to display the
DVI Source Alignment Menu. This menu enables you to adjust all aspects of the source’s
“visible” parameters.
Figure 4-18. DVI Source Alignment Menu (sample)
Following are descriptions of each DVI Source Alignment Menu function:
Contrast
Brightness
Sharpness
EDID DVI
`çåíê~ëí
From the DVI Source Alignment Menu, select Contrast to adjust the overall contrast of
the selected DVI input.
The adjustment range is 75.0% to 125.0%.
100% is the default setting.
_êáÖÜíåÉëë
From the DVI Source Alignment Menu, select Brightness to adjust the overall brightness
of the selected SDI input.
The adjustment range is 75.0% to 125.0%.
100% is the default setting.
pÜ~êéåÉëë
From the DVI Source Alignment Menu, select Sharpness to adjust the sharpness of the
selected input. This selection sets the scaler's sharpening (or softening) value.
The sharpening range extends from -10 (softest) to +10 (sharpest).
0 is the default setting (which sets the scaler to its optimum sharpness).
bafa=asf
From the DVI Source Alignment Menu, select EDID DVI to display the EDID DVI In
Format Menu, which enables you to update LED-PRO's preferred EDID resolution. Refer
to the “Programming EDID
” section on page 53 for instructions.
SOURCE ALIGNMENT
> Contrast 100.0
Brightness 100.0
Sharpness +0
EDID DVI >>