Filter
Top Products
78 LED-PRO • User’s Guide
4. Operation
Using the Expert Mode Menu
~ When LED-PRO detects Macrovision copy protection on the incoming
YPbPr NTSC/PAL video, the value is automatically repositioned to 60mV
to account for the reduced amplitude sync pulse.
p~îÉ=`çåÑáÖ
From the Input Setup Menu, select Save Config to display the Save Config As Menu,
which allows you to save and name up to 60 input configurations.
oÉëÉí=`çåÑáÖ
From the Input Setup Menu, select Reset Config to remove all user-entered configuration
settings from the current input.
oÉÅ~ää=`çåÑáÖ
From the Input Setup Menu, select Recall Config to display the Recall Config Menu,
which enables you to recall input configurations that were previously saved for the currently
selected input format and type.
Note
The default Sync Slice level has been optimized for virtually
all sources that will be encountered and should rarely, if ever,
require adjustment. However, the ability to adjust the level is
provided to improve sync detection and synchronization in
cases of extremely noisy RGsB or YPbPr video signals.
Note
The Save Config function (in the Input Setup Menu) is
identical to that found in the Input Position Menu. Refer to
the “Save Config
” section on page 107 for instructions.
Note
The Reset Config function (in the Input Setup Menu) is
identical to that found in the Input Position Menu. Refer to
the “Reset Config
” section on page 108 for instructions.
Note
The Recall Config function (in the Input Setup Menu) is
identical to that found in the Input Position Menu. Refer to
the “Recall Config
” section on page 109 for instructions.