Filter
Top Products
LED-PRO • User’s Guide 33
4. Operation
Quick Function Reference
nìáÅâ=cìåÅíáçå=oÉÑÉêÉåÅÉ
Use the following table to quickly access the proper menu for a specific function. Both
hyperlinks and page numbers are provided.
Table 4-1. LED-PRO Quick Function Reference Table
How to: Use the Following: Page
Adjust 1:1 timing 1:1 Timing Adjust Menu 70
Adjust diagonal motion Diagonal Motion
94
Adjust display brightness VFD Brightness
88
Adjust input position (abbreviated procedure) Using the Input Position Menu
105
Adjust LED wall contrast LED Contrast
82
Adjust LED wall gamma curve LED Gamma
82
Adjust output refresh rate Refresh Rate
81
Adjust output timing parameters Timing Adjust
81
Adjust oversample timing OverSample Timing Adjust Menu
71
Align or adjust a DVI source Source Alignment — DVI
48
Align or adjust an analog source Source Alignment — Analog
43
Align or adjust an SDI source Source Alignment — SDI
46
Capture a LOGO Capture Logo
86
Change LED wall status from Standby to Enabled LED Status
82
Change the input format Input Format
69
Change the sampling mode Sampling
69
Change the transition time (rate) Trans Time
85
Change the transition type Trans With
85
Delete a “global” preset (or “View”) Delete
50
Delete a custom input format Custom In Format
72
Delete a LOGO Delete Logo
86
Delete an input configuration Delete Config
79
Display software version Software Version
92
Enable or disable a test pattern Type
94
Enable or disable an LED test pattern LED Test Pattern
102
Enable or disable auto-acquire In Auto Acquire
87
Enable or disable freeze mode Freeze
87
Enable or disable letterbox Letterbox
76