Barco LED-PRO Projector User Manual


 
46 LED-PRO • User’s Guide
4. Operation
Using the Setup Menu
pçìêÅÉ=^äáÖåãÉåí=Ô=paf
From the Setup Menu (for an SD-SDI or HD-SDI input source), select Source Alignment
to display the SDI Source Alignment Menu. This menu enables you to adjust all aspects
of the source’s “visible” parameters.
Figure 4-17. SDI Source Alignment Menu (sample)
Following are descriptions of each SDI Source Alignment Menu function:
Contrast
Brightness
Hue
Saturation
Sharpness
Clip to SubBlk
Luma Tracking
EDID DVI
`çåíê~ëí
From the SDI Source Alignment Menu, select Contrast to adjust the overall contrast of
the selected SDI input.
The adjustment range is 75.0% to 125.0%.
100% is the default setting.
_êáÖÜíåÉëë
From the SDI Source Alignment Menu, select Brightness to adjust the overall brightness
of the selected SDI input.
The adjustment range is 75.0% to 125.0%.
100% is the default setting.
eìÉ
From the SDI Source Alignment Menu, select Hue to adjust the hue of the selected input.
Note that Hue is not applicable for YPbPr inputs.
The adjustment range (in degrees) is -180 to +180.
0 is the default setting.
SOURCE ALIGNMENT
> Contrast 100.0
Brightness 100.0
Hue +0
Saturation 100
Sharpness +0
Clip to SubBlk +0
Luma Tracking +0
EDID DVI >>