Barco LED-PRO Projector User Manual


 
116 LED-PRO • User’s Guide
5. Upgrading Software
Serial Upgrade Method
14. On LED-PRO, perform a factory reset. Press SETUP, select Factory Reset, and
then confirm. In Chapter 4, refer to the “Factory Reset” section on page 52 for
additional details.
15. On LED-PRO, verify that the new software has been loaded correctly. Press
SETUP, then navigate to the Software Version Menu by selecting Expert Mode
> Software Version.
Figure 5-4. Software Version Menu
This completes the software upgrade procedure.
Warning
Use caution when performing this step, as all saved files will
be erased.
SOFTWARE VERSION
Version 2.00