Filter
Top Products
D. Transfer Charging Assembly
1. Detaching the Transfer Roller
1) Open the front door.
2) Open the copier’s top body.
3) Detach the static eliminator.
4) Detach the bushing q, and lift the transfer roller w to detach.
Figure 4-324
Caution:
Do not touch the surface of the roller.
Do not soil the surface of the roller.
2. Attaching the Drum Heater
1) Detach the front cover.
2) Open the copier’s top body by operating the copier open/close lever.
3) Detach the inside cover.
4) Remove the three fixing screws w, and detach the harness cover q.
Figure 4-325
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-44