Filter
Top Products
B. Turning On the Copier
Step
1
2
3
4
5
6
7
8
CHAPTER 8 INSTALLATION
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-5
Work
Connect the power plug to the
power outlet.
Turn on the power switch.
Turn off the power switch.
Supply toner according to the
instructions given on the toner
supply label attached behind
the front door.
Release the developing
assembly by the developing
assembly locking lever.
Install the drum unit.
Lock the developing assembly,
and close the copier’s top unit.
Insert the door switch activator
into the door switch, and turn
on the power.
Remarks
• Make sure that the power outlet is the rating
±10%.
Make sure that the Add Paper message flashes.
• Press the keypad and the Clear key to make
sure that the copy count indication is correct.
When turning the toner cartridge counterclock-
wise to set it, you must fully turn it until it is
locked; the developing assembly can cause a
fault if you operate the machine without locking
the cartridge.
See “D. Attaching the Drum Unit.”
Caution:
Caution: